Whirling Machine to Process EPS screws

The LWN 100 enables finish machining of screws for electric power steering (EPS) technology with minimum space requirements at maximum quality.

Leistritz Produktionstechnik GmbH’s LWN 100, the new whirling machine is able to reliably process EPS screws with a module from 0.8 to 3 and a swivelling angle of up to 42 degrees twice as quickly as other production processes. This is possible for the usual diameter of 14 to 30 mm and a length up to 220 mm.

The new machine speeds up production, and also helps to protect the environment and reduces operating costs. Thanks to the dry machining on the LWN, there are no cooling lubricant costs, resulting in savings on parts cleaning costs. At the same time, the short cycle times contribute to the unprecedented level of economy of the LWN 100 for EPS screw machining. There is no need for a subsequent grinding process.

 

Leistritz Produktionstechnik GmbH
T: +49 (0) 9654 89 403
E: mperisic@leistritz.com
www.leistritz.com
@EMO: Hall 26, Stall E71


Eplan
  Facebook   Twitter   Linkedin   Subscribe