CHIRON Micro5 XL for Precision Micromachining

Micro5 XL five-axis machining center
Micro5 XL five-axis machining center

CHIRON Group introduces its ‘Precision Beast’, the Micro5 XL, a compact five-axis machining center for precision engineering, medical technology, electronics and semiconductor business. The XL expands the Micro5’s machining cube from 50 to 120 mm per side and increases cutting capacity. It needs as little as 1.7 sq mt of floor space, including peripherals.

Precision and Cutting Performance

Simultaneous five-axis machining gives the tool access to angled faces and contoured surfaces in a single setup, reducing the need to reclamp complex parts. A rigid structure and active water cooling of the spindle and both rotary axes help limit thermal drift.

The HSK-E25 spindle comes in 40,000 and 50,000 rpm versions with up to 1.8 Nm of torque. Rapid traverse of up to 30 m/min on each linear axis shortens positioning moves between cuts. Jerk of up to 900 m/s³ helps the axes respond quickly to changes in the toolpath during high-speed machining.

The tower magazine holds 60 or 100 tools and can be loaded while machining continues. Chip-to-chip time is 3.9 seconds. Operators can set up and monitor jobs from the front of the machine using the Beckhoff control, with a direct view into the work area.

Spindle and tool changer in the work area


Applications for the Micro5 XL

Medical and dental applications include titanium and stainless steel bone plates, polyethylene tibial inserts, and crowns and bridges machined from titanium. Watchmakers and jewelry manufacturers can machine cases and bracelets, with precious-metal recovery available for applications such as gold machining.

In electronics and the semiconductor business, examples include precision-machined bases for processor and circuit-board test adapters and components for specialised connectors. Tool and mold makers can produce copper or graphite electrodes for die-sinking EDM and mill small injection mold cavities.
      
Bone Watch Machining Demonstration

The stainless-steel Bone Watch combines a watch-case profile with features modelled on orthopaedic bone plates. In CHIRON Group’s machining trial, roughing with a 6 mm cutter reached a material removal rate of 22 cm³/min. Simultaneous five-axis high-speed cutting produced the fine contours and finished surfaces.

Automation for Longer Production Runs

Optional Variocell automation supports longer unattended runs. Variocell PALLET XM8 exchanges prepared zero-point pallets. Variocell PICK&PLACE loads blanks and unloads finished parts, as demonstrated on the Bone Watch application. Variocell UNO uses a six-axis robot for part handling and can take on additional tasks such as measuring.

 

CHIRON Group SE
www.chiron-group.com
Hall & Stall: 4/139

  Facebook   Twitter   Linkedin   Subscribe