Chase2Mill’s New 6mm Insert

The insert is a versatile tool for general face milling, true 90 degree shoulder milling, full slotting as well as helical ramping and pocket machining.

TaeguTec’s Chase2Mill has a new, compact, four-corner, double-sided insert for multiple applications – the 4NKT 6mm insert for end mills, face mills and modular cutters.

The 90 degree entering angle insert, despite the double-sided design, is suitable for high ramp down angle applications. Its high positive geometry generates low cutting force while the cross edge insert geometry prevents unexpected insert failure.
The increased insert thickness and high strength, combined with the cutter’s wide bottom for improved clamping, enables excellent stability and productive machining.

Furthermore, the 4NKT’s smaller 6mm size compared to the 11mm and 16mm sizes increases the number of teeth on the cutter which is not only good for machining small components, but also makes it a finer pitch tool that increases productivity. The new line of cutters is offered as end mills (D16-40mm), modular types (D16-40mm) and face mill types (D32- 63mm). All cutters include an internal coolant delivery system for efficient chip evacuation that prevents built-up-edges.

TaeguTec India Pvt Ltd
T: +91 (80) 2783 9111

  Facebook   Twitter   Linkedin   Subscribe